EU / ENGLISH
 
 

Technologies

 

TECHNOLOGY LIBRARY

A
  • ACF Laminating/Pre-Bonding
  • B
  • Bolt & Studwelding
  •  
  • Brazing
  • C
  • Compacting
  • D
  • Dispensing
  •  
  • Drawn Arc Welding
  • E
  • Electrostatic Discharge Control
  • F
  • Fiber Laser Marking
  •  
  • Fiber Laser Welding
  •  
  • Fluid Dispensing
  •  
  • Fume Extraction
  • G
  • Gap Welding
  •  
  • Green Laser Welding
  • H
  • Heat Staking
  •  
  • Heat-Sealing/ACF Final Bonding
  •  
  • Hermetic Sealing of electronic packages
  •  
  • Hot Bar Bonding
  •  
  • Hot Bar Reflow Soldering
  •  
  • Hot Bar Systems
  •  
  • Hot Crimping
  • I
  • Induction Heating
  •  
  • Inscribe
  •  
  • Insulated Wire Welding
  • J
  • Jet Dispensing
  • L
  • Laser Cutting
  •  
  • Laser Marking
  •  
  • Laser Marking Systems
  •  
  • Laser Seam Welding
  •  
  • Laser Spot Welding
  •  
  • Laser Welding
  •  
  • Laser Welding Systems
  • M
  • Marking
  •  
  • Micro Joining
  •  
  • Micro Resistance Welding
  • P
  • Parallel Gap Welding
  •  
  • Plastic Welding
  •  
  • Projection Welding
  • R
  • Remote Services
  •  
  • Resistance Welding
  •  
  • Resistance Welding Systems
  •  
  • Robotic Soldering
  • S
  • Saw Blade System
  •  
  • Seam Welding
  •  
  • Short Cycle Studwelding
  •  
  • Single Component Positive Displacement Dispensing
  •  
  • Single Component Time/Pressure Dispensing
  •  
  • Spot Welding
  •  
  • Strand Welding
  •  
  • Studwelding
  •  
  • Studwelding with Capacitor Discharge
  • T
  • Thermocompression Welding
  •  
  • Two Component Dispensing
  • W
  • Weld Monitoring
  •  
  • Welding
  • Jet Dispensing

    jet dispensingWhere dispense shot sizes are getting smaller, and/ or when your products do not allow physical contact with a dispense needle, jetting is a most probable solution. Adhesives, greases, oils, fuxing agents and many other liquids are applied with a maximum of speed and accuracy through a piezo driven dispense valve, designed for extreme durability and low cost of ownership. The valve is electrically actuated. The material may need to be pressurised between 0.1 to 100 Bar. 

     

     Jet Dispensing Benefits

    • High durability, low maintenance costs

    • No reject based on collisions between substrate and dispensing needle

    • Highes process reliability

    • Process acceleration due to a maximum dispensing speed

    • Lowest change-over-times, qualified for variouw liquids

    • High accuracy of the dispensing position

    • Extremely fluid efficiency

    • SPC compatible control systems offer a maximum process control

    Jet Dispensing Applications
    Jet Dispensing can be applied in almost every industry. Examples of Jet Dispensing applications are: 
    dispensing oils and greases for micromechanical and electronic components, cooling lubricants, spraying solvents and primers, cleaning and desinfection agents, dispensing food colours and flavours, hotmelt adhesives, sealing laquers, silicone oils and materials for pressure sensitive adhesive tapes.

    Jet Dispensing is applied in many industries, such as Automotive, Electronics & Solar Cells,  IT & Multimedia, Medical, Aerospace, Defence.

    Medical IT & Multimedia Electronics & Solar Cells
     
     
     

    RELATED PRODUCTS

    MIYACHI EAPRO Jet Dispense Valves & Controllers
    Jet Dispense Valves & Controllers