EU / ENGLISH
 
 

Technologies

 

TECHNOLOGY LIBRARY

A
  • ACF Laminating/Pre-Bonding
  • B
  • Bolt & Studwelding
  •  
  • Brazing
  • C
  • Compacting
  • D
  • Dispensing
  •  
  • Drawn Arc Welding
  • E
  • Electrostatic Discharge Control
  • F
  • Fiber Laser Marking
  •  
  • Fiber Laser Welding
  •  
  • Fluid Dispensing
  •  
  • Fume Extraction
  • G
  • Gap Welding
  •  
  • Green Laser Welding
  • H
  • Heat Staking
  •  
  • Heat-Sealing/ACF Final Bonding
  •  
  • Hermetic Sealing of electronic packages
  •  
  • Hot Bar Bonding
  •  
  • Hot Bar Reflow Soldering
  •  
  • Hot Bar Systems
  •  
  • Hot Crimping
  • I
  • Induction Heating
  •  
  • Inscribe
  •  
  • Insulated Wire Welding
  • J
  • Jet Dispensing
  • L
  • Laser Cutting
  •  
  • Laser Marking
  •  
  • Laser Marking Systems
  •  
  • Laser Seam Welding
  •  
  • Laser Spot Welding
  •  
  • Laser Welding
  •  
  • Laser Welding Systems
  • M
  • Marking
  •  
  • Micro Joining
  •  
  • Micro Resistance Welding
  • P
  • Parallel Gap Welding
  •  
  • Plastic Welding
  •  
  • Projection Welding
  • R
  • Remote Services
  •  
  • Resistance Welding
  •  
  • Resistance Welding Systems
  •  
  • Robotic Soldering
  • S
  • Saw Blade System
  •  
  • Seam Welding
  •  
  • Short Cycle Studwelding
  •  
  • Single Component Positive Displacement Dispensing
  •  
  • Single Component Time/Pressure Dispensing
  •  
  • Spot Welding
  •  
  • Strand Welding
  •  
  • Studwelding
  •  
  • Studwelding with Capacitor Discharge
  • T
  • Thermocompression Welding
  •  
  • Two Component Dispensing
  • W
  • Weld Monitoring
  •  
  • Welding
  • Single Component Time/Pressure Dispensing

    time pressure dispensingAMADA MIYACHI EUROPE offers two dispensing processes:

    A basic benchtop controller is usually combined with a filled syringe for manual dispensing. A relatively simple solution to most one-component fuids, where time
    and air pressure determine the quantity of material that has to be dispensed.

    Depending on your production volume a valve system with a large material pressure container may be an alternative. This gives you production speed and consistancy.


     The following additional dispensing methods are also available::

    Single Component Positive Displacement Dispensing

    Two Component Dispensing

    Jet Dispensing


    Single Component Time/Pressure Dispensing Applications

    Applications in single component time/pressure dispensing are: bonding with cyanoacrylate, doming, spraying conformal coating and gasketing.

    Single Component Time/Pressure Dispensing is applied in many industries, such as Automotive, Electronics & Solar Cells,  IT & Multimedia, Medical, Aerospace, Defence.

    Medical IT & Multimedia Electronics & Solar Cells
     
     
     

    RELATED PRODUCTS

    MIYACHI EAPRO Time/Pressure Valves & Controllers
    Time/Pressure Pinch Tube Valves
    Time/Pressure Spool Valves
    Time/Pressure Needle Valves
    Time/Pressure Diaphragm Valves
    Time/Pressure Spray Valves
    Multi Purpose Digital Controller
     
    MIYACHI EAPRO Air Powered Dispensers
    Air Powered Dispensers