EU / ENGLISH
 
 

Technologies

 

TECHNOLOGY LIBRARY

A
  • ACF Laminating/Pre-Bonding
  • B
  • Bolt & Studwelding
  •  
  • Brazing
  • C
  • Compacting
  • D
  • Dispensing
  •  
  • Drawn Arc Welding
  • E
  • Electrostatic Discharge Control
  • F
  • Fiber Laser Marking
  •  
  • Fiber Laser Welding
  •  
  • Fluid Dispensing
  •  
  • Fume Extraction
  • G
  • Gap Welding
  •  
  • Green Laser Welding
  • H
  • Heat Staking
  •  
  • Heat-Sealing/ACF Final Bonding
  •  
  • Hermetic Sealing of electronic packages
  •  
  • Hot Bar Bonding
  •  
  • Hot Bar Reflow Soldering
  •  
  • Hot Bar Systems
  •  
  • Hot Crimping
  • I
  • Induction Heating
  •  
  • Inscribe
  •  
  • Insulated Wire Welding
  • J
  • Jet Dispensing
  • L
  • Laser Cutting
  •  
  • Laser Marking
  •  
  • Laser Marking Systems
  •  
  • Laser Seam Welding
  •  
  • Laser Spot Welding
  •  
  • Laser Welding
  •  
  • Laser Welding Systems
  • M
  • Marking
  •  
  • Micro Joining
  •  
  • Micro Resistance Welding
  • P
  • Parallel Gap Welding
  •  
  • Plastic Welding
  •  
  • Projection Welding
  • R
  • Remote Services
  •  
  • Resistance Welding
  •  
  • Resistance Welding Systems
  •  
  • Robotic Soldering
  • S
  • Saw Blade System
  •  
  • Seam Welding
  •  
  • Short Cycle Studwelding
  •  
  • Single Component Positive Displacement Dispensing
  •  
  • Single Component Time/Pressure Dispensing
  •  
  • Spot Welding
  •  
  • Strand Welding
  •  
  • Studwelding
  •  
  • Studwelding with Capacitor Discharge
  • T
  • Thermocompression Welding
  •  
  • Two Component Dispensing
  • W
  • Weld Monitoring
  •  
  • Welding
  • Thermocompression Welding

    AMADA MIYACHI EUROPE offers a variety of resistance welding methods. Thermocompression welding - also called “thermo-compression bonding” - is used to produce joints by the principle of “indirect heating”. The two parts are joined under the simultaneous infuence of force and heat. The type of bond corresponds to diffusion welding, i.e. the bond is not produced by melting at the contact points, but by metallic solid body diffusion.

    One of the most common materials used is gold. Gold is especially preferred due to its excellent resistance to oxidation. Other materials can be bonded as well but oxidation has to be removed before bonding.

    Thermocompression Welding Applications 

    Applications Thermocompression Welding

     

     Thermocompression Welding Benefits:
     

    • Offers excellent connections when soldering and welding are not possible

    •  Low heat input

    • Absence of melting

    • Relatively short heating times

    • Little or no deformation of the parts being joined

    • Excellent shear and tensile strength 

     In addition to Thermocompression Welding AMADA MIYACHI EUROPE offers the following resistance welding methods:

    Our proven technologies enable the Automotive, Electronics & Solar Cells,  IT & Multimedia, Medical, Aerospace and Defence industries to supply a variety of thermocompression bonding applications.

    Automotive IT & Multimedia Electronics & Solar Cells
     
     
     

    RELATED PRODUCTS

     
    MIYACHI UNITEK Weld Heads
    80, 180 Series - Thinline Series Weld Heads
    50 Series - Light Force Microjoining Weld Head
    70 Series - Servo Motor Driven Weld Head
    73 Series - High Force Servo Weld Head
    300 Series - Electromagnetic Weld Head System